ℹ️Specifications
Machine Specification Table (Linear Motion)
Linear Rail Type
HG20
HIWIN Linear Rails with a Square Profile HG15: 15mm Width HG20: 20mm Width HG20 rails can handle higher loads than HG15 rails
Max Travel Distance
X: 565mm
(22.244in) Y: 770mm
(30.315in) Z: 85mm
(3.346in)
This is the maximum distance the machine can move in the X (left-right), Y (front-back), and Z (up-down) directions. It defines the size of the area that can be cut.
Ball Screw Type
1605
Ball Screw Diameter
16mm
Choosing a larger ball screw diameter in CNC machines helps to increase stiffness, preventing "whip" during high-speed axis movements and maintaining accuracy and precision.
Ball Screw Pitch
5mm
The ball screw pitch determines the linear travel distance for each revolution of the screw, influencing the machine's resolution and speed.
Positioning Accuracy
0.05mm (0.00196in)
CNC positioning accuracy refers to the degree of precision with which a CNC machine can accurately position its tool or workpiece in relation to the programmed coordinates, ensuring minimal deviation between the intended and actual positions.
Stepper Motor
NEMEA23 60BYGH86-4.2A
Stepper Torque (N·cm)
Unknown, but more than 150
Stepper torque refers to the rotational force or turning power produced by the stepper motor, which determines the motor's ability to drive the axis and overcome resistance in the CNC machine's movements.
Stepper Drivers
S60Pro
Feedrate (mm/min)
100-4000
Feedrate (in/min) (ipm)
3.93 - 157.48
Machine Specification Table (Spindle)
Spindle Power
2,200W (2.2kW) Brushless
Spindle power refers to the amount of rotational energy generated by the spindle motor, typically measured in horsepower (HP) or kilowatts (kW), which determines the machine's capability to perform cutting and machining operations on the workpiece.
Cooling
Water
Water-cooled spindles provide superior cooling efficiency for heavy-duty and continuous CNC machining, while air-cooled spindles are simpler to install and maintain but may be less suitable for prolonged and demanding operations. Water-cooled spindles also tend to be quieter.
Spindle RPM
6,000-24,000
Collet Type
ER20
Collet Clamping Range (mm)
1-13 mm
Collet Clamping Range (in)
0.039-0.512in
Max Spindle Clearance
≤140mm (5.511in)
This is the clearance between the end of the spindle and the bed of the machine. Your material + workholding + tooling fits within this specification to avoid damaging the machine.
Machine Specification Table (Misc)
Power
100V-120V or 220V-240V
This is an option on every machine, your choice depends on where you live and the power supplied from the outlet
Dimensions (LxWxH) (mm)
1120 × 900 × 690
Dimensions (LxWxH) (in)
44.094 x 35.433 x 27.166
Weight (kg)
90
Weight (lb)
~198.4
Last updated